Performance & Value
X1 Hybrid 1PH
Anker SOLIX
67/ 100
Strong evidence coverage · 100%
Evidence checked 2026-08-02
Available in Australia · checked 2026-08-02
Buyer evidence: Ready (100% direct coverage).
LFP100% Usable5 kWh Modular
Full scorecard Score profile
| Measure | X1 Hybrid 1PH | Smile G3 S5 BAT-9.3S |
|---|---|---|
| Capacity & Usability | ||
| Power & Efficiency | ||
| Longevity (verified) | ||
| Safety & Chemistry | ||
| Guarantee & Backbone | ||
| Energy Ecosystem |
Capacity & Usability
- X1 Hybrid 1PH
100 / 100 - Smile G3 S5 BAT-9.3S
88 / 100
Power & Efficiency
- X1 Hybrid 1PH
69 / 100 - Smile G3 S5 BAT-9.3S
69 / 100
Longevity (verified)
- X1 Hybrid 1PH
52 / 100 - Smile G3 S5 BAT-9.3S
60 / 100
Safety & Chemistry
- X1 Hybrid 1PH
75 / 100 - Smile G3 S5 BAT-9.3S
69 / 100
Guarantee & Backbone
- X1 Hybrid 1PH
58 / 100 - Smile G3 S5 BAT-9.3S
43 / 100
Energy Ecosystem
- X1 Hybrid 1PH
59 / 100 - Smile G3 S5 BAT-9.3S
45 / 100
Key specifications
| Measure | X1 Hybrid 1PH | Smile G3 S5 BAT-9.3S |
|---|---|---|
| Published usable capacity range | 5–30 kWh | 9.3–37.2 kWh |
| Scored benchmark | 10 kWh | 9.3 kWh |
| Chemistry | LFP | LFP |
| Power | 6 kW | 5 kW |
| Round-trip | Not recorded | Not recorded |
| Cycle life | Not recorded | Not recorded |
Published usable capacity range
- X1 Hybrid 1PH
- 5–30 kWh
- Smile G3 S5 BAT-9.3S
- 9.3–37.2 kWh
Scored benchmark
- X1 Hybrid 1PH
- 10 kWh
- Smile G3 S5 BAT-9.3S
- 9.3 kWh
Chemistry
- X1 Hybrid 1PH
- LFP
- Smile G3 S5 BAT-9.3S
- LFP
Power
- X1 Hybrid 1PH
- 6 kW
- Smile G3 S5 BAT-9.3S
- 5 kW
Round-trip
- X1 Hybrid 1PH
- Not recorded
- Smile G3 S5 BAT-9.3S
- Not recorded
Cycle life
- X1 Hybrid 1PH
- Not recorded
- Smile G3 S5 BAT-9.3S
- Not recorded
Australia evidence
| Evidence | X1 Hybrid 1PH | Smile G3 S5 BAT-9.3S |
|---|---|---|
| Outcome | Available in Australia | Available in Australia |
| Checked | 2026-08-02 | 2026-08-02 |
| Certifications | The current Australian lists name X1-H5K-S and X1-H6K-S through 11 February 2028 and the exact X1-B10-HC scored battery configuration at 10 kWh usable under BAT-593 through 31 December 2027., The exact battery configuration publishes IEC 62619 and the exact hybrid power modules publish AS/NZS 4777.2 and IEC 62109-family safety compliance., The current CSIP-AUS register identifies an Anker SOLIX Aggregator pathway for the approved X1 inverter family. | The current Australian approved-battery export lists SMILE-G3-BAT-9.3S and stacks through six modules to 31 December 2027; the exact system datasheet publishes IEC 62619 and AS/NZS 4777.2. |
| Warranty scope | Australia; the exact hybrid power and battery codes receive 10-year duration and 70% retained-capacity terms. Exact throughput is withheld because the warranty throughput table omits the approved hybrid configuration's HC suffix. | The exact Australian datasheet publishes 10-year product and battery-performance warranties, governed by current AlphaESS Australia terms and Australian Consumer Law. |
| Warranty remedy | Replacement parts or replacement units, which may be refurbished or functionally equivalent; refund is reserved for limited circumstances stated in the policy. | Repair or replacement at AlphaESS's option. |
| Labour and reinstallation | Dismantling, installation and troubleshooting costs are excluded. Dismantling, reinstallation and moving the device to a new location are excluded. | Installer travel and on-site labour are excluded. Removal and reinstallation are not promised. |
| Freight | Anker supplies return instructions and delivers a repaired or replacement product in the original country; buyer-arranged transport damage is excluded. | Replacement-parts freight is covered for an accepted claim. |
| Transfer and registration | The policy is restricted to the original country of purchase and does not publish an automatic transfer right for a later property owner. Proof of purchase, serial number and defect details are required. Warranty applies to direct or authorised-reseller purchases; other reseller purchases require confirmation. | Transfers automatically with the building while the system remains installed; ownership evidence may be required. Initial serial registration and eligible installation are required. |
| Grid compatibility | Single-phase hybrid system with direct PV input, 6 kW rated backup output, 10 kVA peak for 10 seconds and a published sub-10 ms transition on the scored X1-H6K-S reference. | The exact S5 configuration is a 230 V single-phase hybrid system with 5 kVA backup and AS/NZS 4777.2 grid regulation; final DNSP approval remains installation-specific. |
| System fit | No exact product pairing recorded | Confirmed: SMILE-G3-S5-INV with SMILE-G3-BAT-9.3S |
| Local product pathway | No separate local pathway recorded | No separate local pathway recorded |
| Buyer evidence | Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed. | Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed. |
| Safety notice | No model-specific notice recorded | No model-specific notice recorded |
| Review note | Anker Innovations Australia Pty Ltd is the named local importer and publishes Australian phone, email and claim details. | The exact 9.3 kWh battery module and supported stacks are current Australian approved-battery entries. |
| Sources | Source 1Source 2Source 3Source 4Source 5Source 6 | Source 1Source 2Source 3 |
Outcome
- X1 Hybrid 1PH
- Available in Australia
- Smile G3 S5 BAT-9.3S
- Available in Australia
Checked
- X1 Hybrid 1PH
- 2026-08-02
- Smile G3 S5 BAT-9.3S
- 2026-08-02
Certifications
- X1 Hybrid 1PH
- The current Australian lists name X1-H5K-S and X1-H6K-S through 11 February 2028 and the exact X1-B10-HC scored battery configuration at 10 kWh usable under BAT-593 through 31 December 2027., The exact battery configuration publishes IEC 62619 and the exact hybrid power modules publish AS/NZS 4777.2 and IEC 62109-family safety compliance., The current CSIP-AUS register identifies an Anker SOLIX Aggregator pathway for the approved X1 inverter family.
- Smile G3 S5 BAT-9.3S
- The current Australian approved-battery export lists SMILE-G3-BAT-9.3S and stacks through six modules to 31 December 2027; the exact system datasheet publishes IEC 62619 and AS/NZS 4777.2.
Warranty scope
- X1 Hybrid 1PH
- Australia; the exact hybrid power and battery codes receive 10-year duration and 70% retained-capacity terms. Exact throughput is withheld because the warranty throughput table omits the approved hybrid configuration's HC suffix.
- Smile G3 S5 BAT-9.3S
- The exact Australian datasheet publishes 10-year product and battery-performance warranties, governed by current AlphaESS Australia terms and Australian Consumer Law.
Warranty remedy
- X1 Hybrid 1PH
- Replacement parts or replacement units, which may be refurbished or functionally equivalent; refund is reserved for limited circumstances stated in the policy.
- Smile G3 S5 BAT-9.3S
- Repair or replacement at AlphaESS's option.
Labour and reinstallation
- X1 Hybrid 1PH
- Dismantling, installation and troubleshooting costs are excluded. Dismantling, reinstallation and moving the device to a new location are excluded.
- Smile G3 S5 BAT-9.3S
- Installer travel and on-site labour are excluded. Removal and reinstallation are not promised.
Freight
- X1 Hybrid 1PH
- Anker supplies return instructions and delivers a repaired or replacement product in the original country; buyer-arranged transport damage is excluded.
- Smile G3 S5 BAT-9.3S
- Replacement-parts freight is covered for an accepted claim.
Transfer and registration
- X1 Hybrid 1PH
- The policy is restricted to the original country of purchase and does not publish an automatic transfer right for a later property owner. Proof of purchase, serial number and defect details are required. Warranty applies to direct or authorised-reseller purchases; other reseller purchases require confirmation.
- Smile G3 S5 BAT-9.3S
- Transfers automatically with the building while the system remains installed; ownership evidence may be required. Initial serial registration and eligible installation are required.
Grid compatibility
- X1 Hybrid 1PH
- Single-phase hybrid system with direct PV input, 6 kW rated backup output, 10 kVA peak for 10 seconds and a published sub-10 ms transition on the scored X1-H6K-S reference.
- Smile G3 S5 BAT-9.3S
- The exact S5 configuration is a 230 V single-phase hybrid system with 5 kVA backup and AS/NZS 4777.2 grid regulation; final DNSP approval remains installation-specific.
System fit
- X1 Hybrid 1PH
- No exact product pairing recorded
- Smile G3 S5 BAT-9.3S
- Confirmed: SMILE-G3-S5-INV with SMILE-G3-BAT-9.3S
Local product pathway
- X1 Hybrid 1PH
- No separate local pathway recorded
- Smile G3 S5 BAT-9.3S
- No separate local pathway recorded
Buyer evidence
- X1 Hybrid 1PH
- Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed.
- Smile G3 S5 BAT-9.3S
- Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed.
Safety notice
- X1 Hybrid 1PH
- No model-specific notice recorded
- Smile G3 S5 BAT-9.3S
- No model-specific notice recorded
Review note
- X1 Hybrid 1PH
- Anker Innovations Australia Pty Ltd is the named local importer and publishes Australian phone, email and claim details.
- Smile G3 S5 BAT-9.3S
- The exact 9.3 kWh battery module and supported stacks are current Australian approved-battery entries.
Sources
Australia purchase checks
Make the shortlist quote-ready
These checks sit beside the benchmark score. They are site, tariff and contract questions that no product score can settle.
- Lock the exact model and installation-date listing.
Ask for every model number to appear on the quote and order. The Clean Energy Council product lists are live: STC creation requires listed products at installation, and network requirements may also depend on current approval.
- Obtain the site-specific connection settings.
Have the retailer state the supply phase, inverter connection limit, export limit and any export-control cost. The local network connection agreement, not a generic datasheet, determines those settings. See the Australian Government's connection guidance.
- Test savings against the household, not a brochure.
Ask which bills or interval data, tariff, feed-in rate, export limit and future loads support the savings and payback claim. Self-consumed electricity and tariff timing usually matter more than a headline feed-in rate. See the system sizing and battery savings guidance.
- Specify the operating outcome.
Define the usable energy, output power, backed-up circuits and outage behaviour. Confirm whether VPP participation, an internet connection, or an additional controller changes the configuration, reserve level, warranty or support path.
- Name the party responsible after installation.
Keep the retailer, installer, manufacturer warranty and escalation path in the contract. Australian Consumer Law guarantees apply separately from any manufacturer warranty; where one business supplied both product and installation, it is generally responsible for the remedy. See the ACCC guidance.
Where the comparison separates
OverallX1 Hybrid 1PH leads the global score by 5 points.
Strongest dimensionsX1 Hybrid 1PH: Capacity & Usability · Smile G3 S5 BAT-9.3S: Capacity & Usability
Largest differenceX1 Hybrid 1PH has the largest pillar edge in Guarantee & Backbone (15 points).
Market evidenceX1 Hybrid 1PH: buyer ready · Smile G3 S5 BAT-9.3S: buyer ready
A score lead is only meaningful inside this shared class or tier. Weigh it against the specification and evidence rows above before deciding.
Both products are scored in the Performance & Value class, on the same rubric weighting. Scores are not comparable across classes or tiers. Full methodology.