| Published capacity range | 4.8–24 kWh |
| Scored configuration | 9.6 kWh |
| Cell chemistry | LFP (LiFePO4) |
| Usable capacity | 9.6 kWh |
| Usable energy / DoD | 96% DoD |
| Continuous power output | 6 kW |
| Warranty period | 10 yr |
| Safety certification | UL9540 / IEC62619 |
| Reliability testing | Not independently tested |
Some values are estimated where independent verification was not available: see the full scorecard and review.solar/terms.
B2 HV + H2 · every criterion scored by the live rubric (Solar Analytica battery rubric v2.9.0), with its recorded value, evidence status, and any linked source. Page 1 carries the buying-decision summary; this page is the full record for verification and right of reply.
| Capacity & Usability | |||
| Usable energy / DoD (%) | 96 | stated | Source |
| Modularity & scalability | Fully modular, ≤5 kWh increments, expandable in field | datasheet | Source |
| Power & Efficiency | |||
| Continuous power output (kW) | 6.0 | datasheet | Source +1 |
| Longevity (verified) | |||
| Warranty throughput | 2.5-5 MWh warranted per kWh usable | datasheet | Source |
| Warranty period (yrs) | 10 | datasheet | Source |
| Verified reliability | Not independently tested | not found | Source +1 |
| Safety & Chemistry | |||
| Cell chemistry | LFP (LiFePO4) | datasheet | Source |
| Safety certification | UL9540 / IEC62619 | datasheet | Source |
| AC terminal & connection protection | Not specified | stated | Source +1 |
| Ingress protection (outdoor) | IP65+ / IP66 outdoor-rated | datasheet | Source |
| Cell provenance & traceability | Undisclosed | not found | Source +1 |
| Guarantee & Backbone | |||
| Warranty assurance | Parts only | datasheet | Source |
review.solar · audit sheet · Solar Analytica battery rubric v2.9.0 · https://review.solar/cards/saj-b2-hv-h2-au