Compare Solar Panels, Batteries & Inverters Side by Side

Side by side

Score profile

Measure	APX S0 + MIN XH2	Smile G3 S5 / BAT-10.1P
Capacity & Usability	91 / 100	82 / 100
Power & Efficiency	61 / 100	62 / 100
Longevity (verified)	57 / 100	65 / 100
Safety & Chemistry	73 / 100	75 / 100
Guarantee & Backbone	43 / 100	62 / 100
Energy Ecosystem	40 / 100	58 / 100

Capacity & Usability

APX S0 + MIN XH2: 91 / 100
Smile G3 S5 / BAT-10.1P: 82 / 100

Power & Efficiency

APX S0 + MIN XH2: 61 / 100
Smile G3 S5 / BAT-10.1P: 62 / 100

Longevity (verified)

APX S0 + MIN XH2: 57 / 100
Smile G3 S5 / BAT-10.1P: 65 / 100

Safety & Chemistry

APX S0 + MIN XH2: 73 / 100
Smile G3 S5 / BAT-10.1P: 75 / 100

Guarantee & Backbone

APX S0 + MIN XH2: 43 / 100
Smile G3 S5 / BAT-10.1P: 62 / 100

Energy Ecosystem

APX S0 + MIN XH2: 40 / 100
Smile G3 S5 / BAT-10.1P: 58 / 100

Side by side

Key specifications

Show differences only (3 of 7 rows match)

Measure	APX S0 + MIN XH2	Smile G3 S5 / BAT-10.1P
Architecture	DC-coupled battery	All-in-one energy system
Published usable capacity range	5–30 kWh	9.6–57.6 kWh
Scored benchmark	10 kWh	9.6 kWh
Chemistry	LFP	LFP
Power	5.0 kW	5 kW
Round-trip	Not recorded	Not recorded
Cycle life	Not recorded	Not recorded

Architecture

APX S0 + MIN XH2: DC-coupled battery
Smile G3 S5 / BAT-10.1P: All-in-one energy system

Published usable capacity range

APX S0 + MIN XH2: 5–30 kWh
Smile G3 S5 / BAT-10.1P: 9.6–57.6 kWh

Scored benchmark

APX S0 + MIN XH2: 10 kWh
Smile G3 S5 / BAT-10.1P: 9.6 kWh

Chemistry

APX S0 + MIN XH2: LFP
Smile G3 S5 / BAT-10.1P: LFP

Power

APX S0 + MIN XH2: 5.0 kW
Smile G3 S5 / BAT-10.1P: 5 kW

Round-trip

APX S0 + MIN XH2: Not recorded
Smile G3 S5 / BAT-10.1P: Not recorded

Cycle life

APX S0 + MIN XH2: Not recorded
Smile G3 S5 / BAT-10.1P: Not recorded

Local evidence

Australia evidence

Evidence	APX S0 + MIN XH2	Smile G3 S5 / BAT-10.1P
Outcome	Available in Australia	Available in Australia
Checked	2026-08-02	2026-08-29
Certifications	BAT-995 lists all six exact APX S0 AU configurations, approved 23 April 2026 and expiring 31 December 2027., EESS-230870-1 lists all seven exact MIN TL-XH2 inverters, approved 10 July 2024 and expiring 10 July 2027.	The exact BAT-10.1P datasheet lists IEC 62619, IEC 63056, IEC 62040 and UN 38.3; the SMILE-G3-S5 AU system datasheet lists AS 4777.2 and IEC 62109.
Warranty scope	Ten years for APX S0 AU, subject to the cycle schedule, monitoring requirement and the governing exclusions.	Australia; the 11 October 2024 warranty names SMILE-G3-S5 and BAT-10.1P with a ten-year term, 70% retained capacity and a 3.12 MWh/kWh throughput condition for eligible installations from 1 November 2024.
Warranty remedy	Repair or replacement is available at Growatt's discretion; later-term remedies may include a prorated buyback or customer contribution.	Repair or replacement at AlphaESS's option.
Labour and reinstallation	Labour is not an unconditional warranty entitlement. Removal and reinstallation costs are not unconditionally covered.	Installer travel and on-site labour are excluded. Removal and reinstallation are not promised.
Freight	Transport and logistics are not an unconditional warranty entitlement.	Replacement-parts freight is covered for an accepted claim.
Transfer and registration	The governing warranty states that coverage is non-transferable. Continuous monitoring is required; without it the published warranty term reduces to three years.	The warranty is non-transferable except where the products remain installed in a building, in which case it transfers to a later purchaser of that building. Serial registration before a claim, and installation by an SAA-accredited installer with a valid Alpha Installer ID, are required.
Grid/network approval evidence	Single-phase MIN TL-XH2 Australian hybrid inverter family. DNSP settings, export limits and acceptance remain site-specific.	The exact AU system is a 5 kW, 230 V single-phase hybrid under AS 4777.2. Current project approval and installer eligibility remain installation-specific.
Local product pathway	No separate local pathway recorded	No separate local pathway recorded
Buyer evidence	Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed.	Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed.
Safety notice	No model-specific notice recorded	No model-specific notice recorded
Review note	The exact MIN TL-XH2 datasheet names APX S0 only. APX S2, backup hardware, VPP participation and third-party batteries are outside this record.	AlphaESS's current 2026 Australian brochure lists SMILE-G3-S5/B5 with both BAT-10.1P and BAT-9.3S. The battery options coexist; neither is presented as the formal successor to the other.
Register: parts term	Not in the structured register	Not in the structured register
Register: labour and service	Not in the structured register	Not in the structured register
Register: transport and freight	Not in the structured register	Not in the structured register
Register: registration	Not in the structured register	Not in the structured register
Register: transferability	Not in the structured register	Not in the structured register
Register: explicit unknowns	Not in the structured register	Not in the structured register
Latest reviewed Approval Watch event	No exact-identity event in reviewed history	No exact-identity event in reviewed history
Sources	Source 1 Source 2 Source 3 Source 4 Source 5 Source 6 Source 7	Source 1 Source 2 Source 3 Source 4 Source 5 Source 6

Outcome

APX S0 + MIN XH2: Available in Australia
Smile G3 S5 / BAT-10.1P: Available in Australia

Checked

APX S0 + MIN XH2: 2026-08-02
Smile G3 S5 / BAT-10.1P: 2026-08-29

Certifications

APX S0 + MIN XH2: BAT-995 lists all six exact APX S0 AU configurations, approved 23 April 2026 and expiring 31 December 2027., EESS-230870-1 lists all seven exact MIN TL-XH2 inverters, approved 10 July 2024 and expiring 10 July 2027.
Smile G3 S5 / BAT-10.1P: The exact BAT-10.1P datasheet lists IEC 62619, IEC 63056, IEC 62040 and UN 38.3; the SMILE-G3-S5 AU system datasheet lists AS 4777.2 and IEC 62109.

Warranty scope

APX S0 + MIN XH2: Ten years for APX S0 AU, subject to the cycle schedule, monitoring requirement and the governing exclusions.
Smile G3 S5 / BAT-10.1P: Australia; the 11 October 2024 warranty names SMILE-G3-S5 and BAT-10.1P with a ten-year term, 70% retained capacity and a 3.12 MWh/kWh throughput condition for eligible installations from 1 November 2024.

Warranty remedy

APX S0 + MIN XH2: Repair or replacement is available at Growatt's discretion; later-term remedies may include a prorated buyback or customer contribution.
Smile G3 S5 / BAT-10.1P: Repair or replacement at AlphaESS's option.

Labour and reinstallation

APX S0 + MIN XH2: Labour is not an unconditional warranty entitlement. Removal and reinstallation costs are not unconditionally covered.
Smile G3 S5 / BAT-10.1P: Installer travel and on-site labour are excluded. Removal and reinstallation are not promised.

Freight

APX S0 + MIN XH2: Transport and logistics are not an unconditional warranty entitlement.
Smile G3 S5 / BAT-10.1P: Replacement-parts freight is covered for an accepted claim.

Transfer and registration

APX S0 + MIN XH2: The governing warranty states that coverage is non-transferable. Continuous monitoring is required; without it the published warranty term reduces to three years.
Smile G3 S5 / BAT-10.1P: The warranty is non-transferable except where the products remain installed in a building, in which case it transfers to a later purchaser of that building. Serial registration before a claim, and installation by an SAA-accredited installer with a valid Alpha Installer ID, are required.

Grid/network approval evidence

APX S0 + MIN XH2: Single-phase MIN TL-XH2 Australian hybrid inverter family. DNSP settings, export limits and acceptance remain site-specific.
Smile G3 S5 / BAT-10.1P: The exact AU system is a 5 kW, 230 V single-phase hybrid under AS 4777.2. Current project approval and installer eligibility remain installation-specific.

Local product pathway

APX S0 + MIN XH2: No separate local pathway recorded
Smile G3 S5 / BAT-10.1P: No separate local pathway recorded

Buyer evidence

APX S0 + MIN XH2: Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed.
Smile G3 S5 / BAT-10.1P: Ready (100% direct coverage): Local availability, buyer evidence, and the publication threshold are confirmed.

Safety notice

APX S0 + MIN XH2: No model-specific notice recorded
Smile G3 S5 / BAT-10.1P: No model-specific notice recorded

Review note

APX S0 + MIN XH2: The exact MIN TL-XH2 datasheet names APX S0 only. APX S2, backup hardware, VPP participation and third-party batteries are outside this record.
Smile G3 S5 / BAT-10.1P: AlphaESS's current 2026 Australian brochure lists SMILE-G3-S5/B5 with both BAT-10.1P and BAT-9.3S. The battery options coexist; neither is presented as the formal successor to the other.

Register: parts term

APX S0 + MIN XH2: Not in the structured register
Smile G3 S5 / BAT-10.1P: Not in the structured register

Register: labour and service

APX S0 + MIN XH2: Not in the structured register
Smile G3 S5 / BAT-10.1P: Not in the structured register

Register: transport and freight

APX S0 + MIN XH2: Not in the structured register
Smile G3 S5 / BAT-10.1P: Not in the structured register

Register: registration

APX S0 + MIN XH2: Not in the structured register
Smile G3 S5 / BAT-10.1P: Not in the structured register

Register: transferability

APX S0 + MIN XH2: Not in the structured register
Smile G3 S5 / BAT-10.1P: Not in the structured register

Register: explicit unknowns

APX S0 + MIN XH2: Not in the structured register
Smile G3 S5 / BAT-10.1P: Not in the structured register

Latest reviewed Approval Watch event

APX S0 + MIN XH2: No exact-identity event in reviewed history
Smile G3 S5 / BAT-10.1P: No exact-identity event in reviewed history

Sources

APX S0 + MIN XH2: Source 1 Source 2 Source 3 Source 4 Source 5 Source 6 Source 7
Smile G3 S5 / BAT-10.1P: Source 1 Source 2 Source 3 Source 4 Source 5 Source 6

Australia purchase checks

Make the shortlist quote-ready

These checks sit beside the benchmark score. They are site, tariff and contract questions that no product score can settle.

Lock the exact model and installation-date listing.
Ask for every model number to appear on the quote and order. The Clean Energy Council product lists are live: STC creation requires listed products at installation, and network requirements may also depend on current approval.
Obtain the site-specific connection settings.
Have the retailer state the supply phase, inverter connection limit, export limit and any export-control cost. The local network connection agreement, not a generic datasheet, determines those settings. See the Australian Government's connection guidance.
Test savings against the household, not a brochure.
Ask which bills or interval data, tariff, feed-in rate, export limit and future loads support the savings and payback claim. Self-consumed electricity and tariff timing usually matter more than a headline feed-in rate. See the system sizing and battery savings guidance.
Specify the operating outcome.
Define the usable energy, output power, backed-up circuits and outage behaviour. Confirm whether VPP participation, an internet connection, or an additional controller changes the configuration, reserve level, warranty or support path.
Name the party responsible after installation.
Keep the retailer, installer, manufacturer warranty and escalation path in the contract. Australian Consumer Law guarantees apply separately from any manufacturer warranty; where one business supplied both product and installation, it is generally responsible for the remedy. See the ACCC guidance.

Decision snapshot

Where the comparison separates

OverallSmile G3 S5 / BAT-10.1P leads the global score by 7 points.

Strongest dimensionsAPX S0 + MIN XH2: Capacity & Usability · Smile G3 S5 / BAT-10.1P: Capacity & Usability

Largest differenceSmile G3 S5 / BAT-10.1P has the largest pillar edge in Guarantee & Backbone (19 points).

Market evidenceAPX S0 + MIN XH2: buyer ready · Smile G3 S5 / BAT-10.1P: buyer ready

A score lead is only meaningful inside this shared class or tier. Weigh it against the specification and evidence rows above before deciding.

Both products are scored in the Performance & Value class, on the same rubric weighting. Scores are not comparable across classes or tiers. Full methodology.

Compare

APX S0 + MIN XH25–30 kWh

Smile G3 S5 / BAT-10.1P9.6–57.6 kWh