烁电2.0

Last verified 2026-10-06.

• Renshine Solar describes 烁电2.0 (roughly 'Shuodian 2.0') as its latest generation perovskite product, and the manual lists a perovskite cell type in a glass, perovskite chip, glass build; the product page heading prints only 烁电 and the manual calls it the 烁电 2.0 series, with no model code on either source.
• Legal manufacturer as printed: 仁烁光能（苏州）有限公司.
• The product page refers to a mass production efficiency and shows installed customer cases, including villa systems in Shanghai and Suzhou, but states no price, sales channel or availability.
• The two official sources disagree on output: the product page prints 158.4 W at 22% module efficiency, while the manual lists power bins of 135 W to 150 W at 18.80% to 20.80% for the 1200 by 600 mm module.
• It cannot be scored yet: an exact model code, governing warranty terms and an applicable certification listing remain unresolved. A maker-hosted certificate has now been read, but its model, power and voltage scope is not joined to this Shuodian 2.0 sheet.
• This record is not joined to any scored or evidence record for another perovskite product.
• The two-page Shuodian 2.0 manual has no established printed revision or revision date. Its STC columns are 135, 140, 145 and 150 W, with efficiencies of 18.80%, 19.40%, 20.10% and 20.80% respectively. STC means AM1.5, irradiance 1000 W/m² and cell temperature 25°C. The product page’s 158.4 W and 22% remain separate conflicting figures; no exact model or revised electrical column resolves them.
• For those four STC columns respectively, Vmp is 88.83, 91.03, 91.71 and 96.39 V; Imp is 1.52, 1.54, 1.58 and 1.56 A; Voc is 105.23, 106.79, 108.48 and 110.17 V; and Isc is 1.67, 1.69, 1.70 and 1.71 A. These are maker table values, not independently verified output or a chosen scored configuration.
• The corresponding NMOT columns give 101.52, 105.28, 109.04 and 112.80 W at irradiance 800 W/m², ambient temperature 20°C and wind speed 1 m/s, with stated measurement tolerance of +/-5%. They are a separate measurement basis from STC; the sheet does not establish a numeric NMOT cell temperature.
• The sheet gives temperature coefficients of Pmax -0.110%/°C, Voc -0.101%/°C and Isc -0.039%/°C. It specifies 1500 V maximum system voltage, -40 to +85°C operating temperature, one diode, an IP68 junction box and 4 A maximum fuse current. Junction-box IP68 does not establish whole-module waterproofing, and fuse current is not a continuous output rating.
• The manual describes a 1200 x 600 x 9 mm, 0.72 m² module weighing 15.5 kg, built with 2 mm tempered glass, a 3.2 mm perovskite power-generating chip and 3.2 mm tempered glass. Its stated mechanical load is +/-2400 Pa. Fire, hotspot, low-carbon and weak-light marketing claims require their own exact-product evidence; these specifications alone do not establish independent field reliability or lifecycle carbon performance.
• The maker’s IEC announcement, dated 7 September 2026, refers to a 30 December 2024 certification event. Its combined certificate image prints PV 50658567 0001 and report CN240D39 001 for Renshine Solar (Suzhou) Co., Ltd. It names RS-M072BZWKTB-xxx and RS-M072BZWKHB-xxx, where xxx is 85 to 115 W in 5 W steps, with 91 cells and up to 1000 V DC (Voc at STC). That is not an established identity join to this manual’s 135 to 150 W and 1500 V scope.
• The maker-hosted certificate prints issue and valid-from date 27 December 2024 and expiry 26 December 2029. It lists IEC 61215-1, 61215-1-4 and 61215-2:2021; IEC 61730-1 and 61730-2:2023; corresponding EN IEC 61215:2021 parts and EN IEC 61730:2018 parts. Remarks include Class C according to UL 790 and 1600 Pa design load with 1.5 safety factor in each direction. These apply only to its listed models; they are not a reviewed UL listing, global market approval or a new Shuodian fire/load rating. The public Certipedia lookup returned 503, so current registry status has not been verified from the printed dates.
• No governing Shuodian warranty was recovered from the reviewed sources. The loaded maker warranty and certificate category views showed no document items, a bounded observation rather than whole-site absence. Warranty commencement, duration, degradation entitlement, exclusions, claims, transferability, remedies and service costs remain unresolved. Maker customer-case estimates, field-yield summaries and no-degradation claims are not independently reviewed exact-model results or an annual degradation rate.

• Renshine Solar product page: 烁电https://www.renshinesolar.com/product/detail?id=6

  Establishes the product name 烁电2.0 in the body text under the heading 烁电, its description as the maker's latest generation perovskite product, a printed 158.4 W and 22% figure, a mass production efficiency claim, customer cases in Shanghai and Suzhou, and the legal name in the footer.

• Renshine Solar product manual: 烁电 2.0 系列 (PDF)https://www.renshinesolar.com/storage/files/仁烁-烁电-单页.pdf

  Establishes the 烁电 2.0 series electrical datasheet with power bins of 135 W to 150 W and a perovskite cell type, prints no model code and shows only TUV, UL and CQC logos with no warranty terms.

• Renshine maker IEC certification announcement, 7 September 2026https://www.renshinesolar.com/article/detail?id=40

  Read 6 October; announcement refers to a 30 December 2024 event. Maker-hosted certificate model/power/voltage scope is not joined to the Shuodian 2.0 manual.

• Maker-hosted certificate PV 50658567 0001, combined pages 1 and 2https://www.renshinesolar.com//storage/tinymce/images/cd0d165e9302c73978d21d8cbf01c48a6a9e5d17f1f73.jpg

  Both printed pages visually read; report CN240D39 001, listed 85 to 115 W models and 1000 V limit. Printed validity is distinct from current registry status; no transfer to 135 to 150 W / 1500 V Shuodian sheet.