Corrections
A benchmark record changes when the evidence does. When a re-verification materially changes a published record, the record carries a dated note stating what was wrong and what changed, and the note is collected here. Each entry links the affected product, where the same note appears beside its sources. Challenges and corrections can be raised through the process on the disclosures page.
2026-10-05
GoodWe DNS G3 Australian datasheet, 3-6 kW; surge protection corrected 2026-10-05 against exact AU V2.1 page 2: standard Type III DC+AC, Type II optional; no scored option assumed, benchmark/market/verification dates retained.
2026-09-30
SAJ EK90 HS5 Single-Phase 14 kWh
Corrected 2026-09-30: the record scored an older copy of SAJ's EK90 HS5 Australian limited warranty (sha256 ae292a09, no version line), which states 60% SOH and, in one clause, a ten year term. SAJ's Australian warranty page linked Version 1.0 dated 8 August 2026 (sha256 5c8ec0fd) on 2026-09-30; it states 70% SOH and 15 years, and the record now follows it. End-of-warranty retained capacity moves from 60% to 70% and the score from 67.2 to 67.7. The older copy is kept on record as superseded. SAJ EK90 HS5 Single-Phase Australian datasheet, exact manual, EK90 HS5 Australian warranty and CER exports checked 2026-08-26 Battery performance register refresh 2026-08-31: battery/DC round-trip efficiency and cycles-to-70% closed or held from the exact governing sheet.
2026-09-30
SAJ EK90 HS5 Three-Phase 14 kWh
Corrected 2026-09-30: the record scored an older copy of SAJ's EK90 HS5 Australian limited warranty (sha256 ae292a09, no version line), which states 60% SOH and, in one clause, a ten year term. SAJ's Australian warranty page linked Version 1.0 dated 8 August 2026 (sha256 5c8ec0fd) on 2026-09-30; it states 70% SOH and 15 years, and the record now follows it. End-of-warranty retained capacity moves from 60% to 70% and the score from 68.1 to 68.5. The older copy is kept on record as superseded. SAJ EK90 HS5 Three-Phase Australian datasheet, exact manual, EK90 HS5 Australian warranty and CER exports checked 2026-08-26 Battery performance register refresh 2026-08-31: battery/DC round-trip efficiency and cycles-to-70% closed or held from the exact governing sheet.; Cell serial-code boundary reviewed2026-10-05 against exact three-phase manual Version0 section10.2; supplier-name hold remains.
2026-09-30
Corrected 2026-09-30: the record's warranty text was read from an older copy of SAJ's EK90 HS5 Australian limited warranty (sha256 ae292a09, no version line), which states 60% SOH and, in one clause, a ten year term. SAJ's Australian warranty page linked Version 1.0 dated 8 August 2026 (sha256 5c8ec0fd) on 2026-09-30; it states 70% SOH and 15 years, and the record now follows it. The 15-year term is unchanged and no inverter score moves. The older copy is kept on record as superseded. SAJ EK90 HS5 Single-Phase S3 / S4 Australian datasheet, exact manual, EK90 HS5 Australian warranty and CER exports checked 2026-08-26
2026-09-30
Corrected 2026-09-30: the record's warranty text was read from an older copy of SAJ's EK90 HS5 Australian limited warranty (sha256 ae292a09, no version line), which states 60% SOH and, in one clause, a ten year term. SAJ's Australian warranty page linked Version 1.0 dated 8 August 2026 (sha256 5c8ec0fd) on 2026-09-30; it states 70% SOH and 15 years, and the record now follows it. The 15-year term is unchanged and no inverter score moves. The older copy is kept on record as superseded. SAJ EK90 HS5 Three-Phase T3 Australian datasheet, exact manual, EK90 HS5 Australian warranty and CER exports checked 2026-08-26
2026-09-01
WINAICO NGX-D3 Dual-Glass 450 W
WINAICO NGX-D3 AU 0824, exact TUV certificates, exact hail report, installation manual and EPD. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Correction 2026-10-08: module efficiency corrected from 22.52% to 23.0% and power tolerance from 3% to 1.11%, from the Australian datasheet (0 to +5 W at 450 W; the 3% is the measurement tolerance).
2026-08-30
FoxESS H3-Pro Australian datasheet V1.2, current CER export and exact Australian warranty closure checked 11 August 2026. First-market US and DE overlay review 2026-08-30: official regional catalogues recorded; Australian overlays and scores unchanged. Exact Australian H3-Pro-15.0 EV hardware/platform evidence integrated 5 October 2026 using direct RS485 guide, A-series V1.1 and FoxCloud App2.0; retained 15 kW anchor is an exact-model assessment, with highest-in-series review unresolved for the documented 15-30 kW family. Correction 2026-10-08: peak efficiency corrected from 98.1% to 97.2%, the maximum in the datasheet's efficiency table (98.1% is the PV-to-battery figure), and the firmware and security band raised after a published security page was found.
2026-08-30
Australian Verto Plus datasheet, live Australian product and support pages, Fronius International Limited Warranty EN_0326 and CER export retrieved 10 August 2026. First-market US and DE overlay review 2026-08-30: official regional catalogues recorded; Australian overlays and scores unchanged. Bounded 6 October 2026 Plus EV/protection/protocol reconciliation: EN_V04 May2025 AU sheet, exact digital Plus manual4204260552, current Wattpilot support, Solar API V1 EN021-15052025 and SunSpec registry SM-000039. Accessory solar-surplus/OCPP EV band corrected; DC1+2/AC2, disabled-on-delivery AFCI, local JSON/API limitations and below16W standby bound explained. Other criteria, 33.3kW identity, markets, warranty and full-record verification dates unchanged.
2026-08-29
Waaree Elite BiN-03 66-cell 695 W
Waaree BiN-03 680-710 W datasheet WEL/E&PD/680-710/132/BiN-03/HC/04/06.06.2024 and TOPCon warranty 25.09.2024. Multi-market warranty-terms recovery 2026-08-29: structured AU, US or IN overlay terms recovered or held from the exact governing instrument. India existing-catalogue panel ALMM review 2026-09-02: IN overlays recorded against List-I revision 03.08.2026; scores unchanged. Exact linked PDF visual review 2026-10-04: page 2 efficiency transcription corrected to 22.37%; PID evidence entered only as manufacturer claim under unchanged rubric. Shop page mixes 685/695 W, efficiency and dimensional statements; no conflicting storefront value substitutes for this reviewed sheet.
2026-08-27
AlphaESS SMILE-M-S Inverter 9.999 kW
Exact technical and warranty sources plus CER source version dated 20 August 2026, checked 2026-08-27 Inverter operating-envelope refresh 2026-08-31: remaining peak, weighted, oversizing or thermal gaps closed as scoped reviewed absences. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Exact M8/M9/M10-S inverter cooling correction reviewed 2026-10-05 using V01 manual printed88-89; lower-power natural-cooling table excluded. Other verification dates unchanged.
2026-08-27
Exact family technical sources, Australian warranty and current regulator snapshot checked 2026-08-27. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Exact Australian source reconciliation 5 October 2026: the current ASW6000-S-G2 datasheet states 97.8% maximum efficiency and 97.5% European efficiency; older global 98.2% maximum is replaced for this AU assessment. Type II surge protection is documented, but its AC/DC side is not identified. The unsupported DC-only scored input is withdrawn; generic Type II protection is not treated as absent, and the exact surge-side evidence gap remains open. Overvoltage categories DC II/AC III are distinct from surge-device types. Benchmark, market and warranty evidence dates are unchanged.
2026-08-26
sonnen sonnenBatterie Evo power unit 5 kW
Australian Evo datasheet version April 2025, AU/NZ operation manual document 5000611 version 002, March 2026 Australian manufacturer warranty, and CER inverter export data as at 29 July 2026 Corrected 2026-08-26: added not-applicable provenance for Max DC:AC oversizing ratio and Max input current per MPPT (A), mirroring the reviewed architecture_boundary finding already on this record's Number of MPPTs and the not_applicable state the 25 August 2026 inverter-envelope ledger already carries for this exact product. No score change: these two criteria have no specs value before or after, so their missing-mode floor is unchanged. This closes the evidence gap without asserting a number that does not exist for this architecture. Inverter operating-envelope refresh 2026-08-31: remaining peak, weighted, oversizing or thermal gaps closed as scoped reviewed absences. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-23
Comet 1N exact AU sheet and N-Type ABC warranty v1.6.3 rechecked 2026-08-23; standard hail evidence is directly linked. The earlier ammonia absence was superseded on 4 October 2026 by exact-model IEC 62716 certification, subject to its stated material-combination conditions. Official Australian due-soon freshness recheck 2026-08-29. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. China first available overlay 2026-09-05: six domestic gates closed for AIKO-A615-MAH72Mw; AU, US and DE overlays and scores unchanged. Correction 2026-10-08: the carbon footprint band corrected from below 400 to 400-650 kg CO2/kWp after the verified EPD (EPDItaly MR-EPDITALY0094) replaced a news page that did not contain the cited figure.
2026-08-23
Canadian Solar TOPHiKu6 72TD 625 W
TOPHiKu6 CS6.1-72TD exact Australian V1.6 sheet rechecked 2026-08-23; fire and tolerance linked and unsupported MBB detail withheld while AU status remains available. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Carbon evidence corrected 2026-10-04: the cited below-400 kg/kWp figure covers HiHero HJT and does not establish this CS6.1-72TD TOPCon product. Canadian Solar publishes corporate carbon-reduction/ESG information; an exact 72TD EPD and certified manufacturing intensity were not established in the reviewed official sources. EPDITALY0340 names MS-family modules and MR-EPDITALY0105 names other model codes; their results are not transferred. The corporate-disclosure rubric band replaces the unsupported low-carbon band. This is an evidence-scope correction, not a measured finding of poor carbon performance or proof that no declaration exists. The exact Australian 625 W benchmark and other technical values are unchanged; production/BOM and measurement boundaries remain unresolved.
2026-08-23
JA Solar DeepBlue 4.0 Pro 455 W
DeepBlue 4.0 Pro exact JAM54D41/LB sheet and JA Solar 2025 sustainability report rechecked 2026-08-23; company scope clarified and unsupported salt Severity 1 withdrawn. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. US overlay recheck 2026-09-04: official United States surfaces still inaccessible or missing; held not_reviewed overlays restamped; existing non-US overlays and scores unchanged.
2026-08-23
Jinko Solar Tiger Neo III 66QL6-BDV 670 W
Tiger Neo III 66QL6-BDV exact sheet, current CEC identity and AU/NZ bifacial warranty Rev AU20251210 rechecked 2026-08-23; salt, ammonia and service coverage corrected. Official Australian due-soon freshness recheck 2026-08-29. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. DE Jinko Tiger Neo 3.0 catalogue recheck 2026-09-12: live German Tiger Neo 3.0 surface now names JKM650-670N-66QL6-BDV after the earlier HTTP 403 and captcha HOLD; Australian and United States overlays and scores unchanged Correction 2026-10-08: the low-carbon EPD value was removed because the cited sources do not state it for this exact model.
2026-08-23
Jinko Solar Tiger Neo 54HL4R-B 440 W
Tiger Neo 54HL4R-B exact sheet and AU/NZ monofacial warranty Rev AU20251210 rechecked 2026-08-23; service coverage corrected. First-market DE overlay review 2026-08-31: official German catalogues recorded for the remaining 17 AU+US identities; Australian and United States overlays and scores unchanged.
2026-08-23
Jinko Solar Tiger Neo 54HL4R 435 W
Tiger Neo 54HL4R-V exact sheet and AU/NZ monofacial warranty Rev AU20251210 rechecked 2026-08-23; service coverage corrected. Official Australian due-soon freshness recheck 2026-08-29. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. DE Jinko Tiger Neo catalogue recheck 2026-09-04: live German Tiger Neo 2.0 and 3.0 surfaces recorded after the earlier jinkosolar.eu HTTP 403; Australian and United States overlays and scores unchanged.
2026-08-23
Jinko Solar Tiger Neo 78HL4-V 630 W
Tiger Neo 78HL4-V exact sheet and AU/NZ monofacial warranty Rev AU20251210 rechecked 2026-08-23; IEC 61730 and service coverage corrected while AU remains not reviewed. India existing-catalogue panel ALMM review 2026-09-02: IN overlays recorded against List-I revision 03.08.2026; scores unchanged. NOCT 45 +/- 2 C and conditional warranty assignment joined on 2026-09-20.
2026-08-23
TCL exact combined sheet and official brochure rechecked 2026-08-23; fire and degradation are linked and unsupported MBB detail withheld. The undated, unversioned source limitation remains explicit. India existing-catalogue panel ALMM review 2026-09-02: IN overlays recorded against List-I revision 03.08.2026; scores unchanged. NMOT 43 +/- 2 C and conditional warranty assignment joined on 2026-09-20. Exact630W tolerance derivation corrected5October2026: retained combined sheet page4 states0to+5W;5/630 x100=0.7936507937%,below1%,with zero negative tolerance. No upward rounding or transfer from696W BNPI or newer3/0% powerbinning. The undated source and newer sheet/manual revision conflict remain held; no market,warranty or whole-product verification refresh.
2026-08-23
Trina Solar Vertex N NEG19RC.20 650 W
Vertex N NEG19RC.20 exact current 625-650 W sheet and 2026 PVEL registry rechecked 2026-08-23; unsupported contact and 650 W PID transfer withdrawn and environmental absences directly linked. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Exact650NEG19RC.20 salt-mist evidence integrated2026-10-04 from TÜV SÜD Z2 070321 0149 Rev.27, IEC61701:2020 method6; unchanged rubric and AU650W benchmark. Exact650NEG19RC.20 ammonia evidence integrated2026-10-04 from TÜV SÜD Z2 070321 0148 Rev.27, IEC62716:2013; unchanged rubric and AU650W benchmark. Financial backing reviewed5October2026 using Trina Solar Co., Ltd.688599 unaudited January-June2026 issuer filing: existing Stable/listed assessment retained with disclosed losses and debt risks. Management12-month going-concern assessment is unaudited and does not guarantee future warranty solvency. Exact AU650W insurer/policy/beneficiary coverage remains not publicly established; corporate listing does not establish module insurance.
2026-08-23
Trina Solar Vertex N NEG21C.20 740 W
Vertex N NEG21C.20 exact current 715-740 W sheet and 2026 PVEL registry rechecked 2026-08-23; unsupported contact, PID and environmental claims withdrawn while AU status remains available. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Environmental evidence integrated 4 October 2026: current TÜV SÜD certificates dated 27 August 2026 explicitly cover unsuffixed TSM-xxxNEG21C.20, 132 half-cells, 635–740 W bins, including the retained TSM-740NEG21C.20 benchmark. PID-shunting is independently certified, with no published numerical loss. Salt-mist test method 6 under IEC61701:2020 supports severity 6; ammonia certification uses IEC62716:2013 without a published quantitative endpoint. Printed expiry 8 March 2031 is conditional on no earlier cancellation, not live surveillance proof. The U, Q and S suffixes are separate. Frontside 740 W STC, 566 W NOCT and 820 W BNPI (1000 W/m2 front, 135 W/m2 rear) are distinct; added-backside-power scenarios do not replace the frontside benchmark.
2026-08-23
EcoFlow OCEAN 2 exact Australian product documents, LFP manual and battery warranty V1.4 valid 15 August 2026, rechecked 2026-08-23. Exact EF BD-5-S2 conditioned usable-capacity reader correction integrated 5 October 2026 from battery manual PDF14; AU/NZ warranty V1.4 capacity protocol checked separately. Scores, market review dates, nominal benchmark, regulator and operating-DoD/terminal holds retained.
2026-08-23
LUNA2000 S1 exact specification, 2026 safety claim, current non-European and European V1.2 warranties, Huawei audited 2025 report, AU catalogue, CER export and iStore identity boundary rechecked 2026-08-23; unsupported RTE and expired performance terms removed. First-market US overlay review 2026-09-01: official United States catalogues recorded; existing Australian and German overlays and scores unchanged. Cell-balancing provenance reconciled 2026-10-05 against exact residential sources; prior passive estimate withdrawn, mechanism unestablished; global/market verification dates and scored configuration unchanged.
2026-08-23
Current sonnenBatterie 10/11 sheet, German guarantee, release notes and company ownership rechecked 2026-08-23; unsupported active cell-balancing claim removed. Partial backup disclosure review 2026-10-04: February 2024 battery sheet joins 10/11 (11 kWh nominal, 10 kWh usable) to the currently linked May 2024 sonnenProtect 4000 sheet. Optional accessory required: 4 kW nominal backup at cos phi = 1 and 4.6 kVA overload for 30 minutes on selected single-phase circuits; no motor-start LRA or PV recharging established. Current page current headline differs from sheet and remains unresolved. Purchase agreement and temperature conditions govern; this is not a full product or market re-verification. Terminal-protection explanation integrated 2026-10-05 from DE/AT/CH installation manual 555 version 18, part 1000141 revision 18, 17 July 2025, pages 36/51/99. Mains-line protection is distinct from terminal thermal monitoring; no score, benchmark or full market re-verification.
2026-08-23
Verto 27.0 exact sheet, model-specific battery and backup boundary, interfaces, reactive-power range and Fronius history rechecked 2026-08-23. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-08-30: official regional catalogues recorded; Australian overlays and scores unchanged. Exact battery/backup boundary review2026-10-04: maker explicitly excludes battery operation from plain Verto; battery criterion evidence corrected from absence to supported non-hybrid limitation. Full Backup is Plus-only, broader plain-Verto islanding remains held. Values/scores and whole-product/market dates unchanged. EV/thermal integration review 2026-10-05: exact plain-Verto 25-33.3 kW instructions and maker Wattpilot/Ohmpilot documentation support conditional surplus EV charging and accessory relay thermal control. No Verto Plus battery/backup transfer; regional status and whole-product verification dates unchanged. Current manual efficiency figures conflict with the retained benchmark source and require a separate revision/applicability review. Reader conditions: EV charging needs optional Wattpilot (OCPP 1.6J), Fronius Smart Meter at the feed-in point, network connection and configuration; one Wattpilot can be PV-optimised at a time, with no current bidirectional V2H/V2G support. Thermal switching needs optional Ohmpilot and Smart Meter, a compatible heat-pump control input and the same utility meter. Solar-surplus thresholds drive the accessory relay; this is not a native inverter SG Ready port or compressor-speed control. The 0-9 kW modulation applies to resistive heating rods. Ohmpilot firmware updates require Solar.web; exact minimum accessory firmware and local tariff availability are not established. Semiconductor reader clarification integrated 2026-10-05 from maker2026 planning PDF38: positive IGBT disclosure for27.0 SPD1+2 article4,210,402 is kept separate from the unresolved TypeII/scored-revision power-stage join. Criterion values,scores,27kW benchmark andwhole-product/market verification dates retained.
2026-08-23
CORE1 STP50-41 current warranty scope, audited 2025 financial position, H1 2026 recovery and manufacturer history rechecked 2026-08-23. India existing-catalogue inverter review 2026-09-02: IN overlays recorded from manufacturer Indian catalogues; scores unchanged. Exact STP50-41 safety/EV boundary integration 2026-10-05: country-dependent ArcFix defaults corrected using current manual; optional Home Manager2.0/EV Charger7.4/22 scheduling supported by Compatibility-HBS Version1.1 and planning instructions. Global CORE1 no-longer-marketed statement explained without changing regional or lifecycle status. Higher OCPP/active Business-control gates retained. Exact STP50-41 optional thermal-load integration 2026-10-05: Home Manager2.0 compatibility and HM-20 SG Ready relay instructions support conditional surplus-triggered accessory switching; native/direct protocol and compressor modulation not credited.
2026-08-23
HYD 6000-ES exact sheet and manual, Shenzhen listing, audited 2025 report and official company history rechecked 2026-08-23; AFCI remains a reviewed absence. India existing-catalogue inverter review 2026-09-02: IN overlays recorded from manufacturer Indian catalogues; scores unchanged. Correction 2026-10-08: peak efficiency corrected from 97.8% to 98.0% and weighted efficiency from 97.3% to 97.5%, the figures in the exact HYD 6000-ES datasheet.
2026-08-22
Jinko Solar Tiger Neo 54HL4R-V 440 W
Jinko 54HL4R-V exact datasheet, current AU warranty and current CER approval, rechecked 2026-08-22 Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model JKM440N-54HL4R-V, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model JKM440N-54HL4R-V, under panel rubric v2.11.0 which added that band. Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. Re-verification 2026-08-20: Independent energy yield recorded as brand-or-series under panel rubric v2.14.0, which applied to this criterion the same exact-model rule v2.13.0 applied to Verified reliability. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. DE Jinko Tiger Neo catalogue recheck 2026-09-04: live German Tiger Neo 2.0 and 3.0 surfaces recorded after the earlier jinkosolar.eu HTTP 403; Australian and United States overlays and scores unchanged. NOCT 45 +/- 2 C and conditional warranty assignment joined on 2026-09-20.
2026-08-19
REC Alpha Pure-R IEC AU CEC 10.2025 V4.2 and exact-family EPD Re-verification 2026-08-19: Verified reliability recorded as "Previously validated, now lapsed" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. First-market DE overlay review 2026-08-31: official German catalogues recorded; Australian and United States overlays and scores unchanged.
2026-08-19
Tesla TSP-415/TSP-420 datasheet (energylibrary.tesla.com, file last_modified 31 July 2026), Tesla Solar Panel Limited Warranty (USA) Rev. 1.2 effective 2 June 2026, and Tesla's certification directory. Re-verified 2026-08-19. Corrected 2026-08-19, four defects: (1) the archived source was the WRONG PRODUCT - the older Tesla Photovoltaic Module T420S/T425S/T430S sheet, a 144-cell 2.111 m2 family the California CEC lists from 2021-07-01, not the 360-cell TSP family. It has been replaced with the live TSP datasheet. (2) `released` read 2023; the California CEC lists all six TSP models from 2025-09-22 and Tesla's FY2025 10-K puts first customer deliveries in January 2026. (3) the governing warranty was cited as effective 6 November 2025, two revisions stale. (4) warranty scope was recorded as North America; the instrument is titled (USA), names the United States, and contains no reference to Canada or North America - the NA-EN filename is misleading. Australian market route rechecked 2026-08-22: Tesla offers solar generically in Australia but does not identify TSP-420, local certification or a governing local panel warranty. First-market DE overlay review 2026-09-01: official German catalogues recorded; existing Australian and United States overlays and scores unchanged. Warranty transfer joined from USA Rev. 1.2 on 2026-09-20. Exact TSP-420 tolerance and PID provenance integration5October2026: datasheet page2 supports +15/-0 W at420 W, derived positive tolerance3.5714285714%; the360-cell TSP-420 remains the scored model. Older144-cell T420S-family archive is excluded from PID evidence. Exact PID and salt-mist results remain not publicly established; no market, warranty or whole-product verification refresh.
2026-08-18
Canadian Solar HiHero+ CS6.2-66HB 645 W
Built 2026-08-18 from Canadian Solar's HiHero+ HJT datasheet v1.5 (EN), text layer intact and cross-read against a render. Cell Type is given verbatim as "HJT cells". Scope note: the datasheet covers 620-645 W while the Australian approval runs 615-665 W across 20 models, so a later sheet exists that was not located; this record is scoped to the intersection of the reviewed sheet and the listing. The cover claims "Up to 95% Power Bifaciality" but the electrical table gives 90% with a +/-5% tolerance; the table value is recorded. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model CS6.2-66HB-645, under panel rubric v2.11.0 which added that band. LeTID re-verified 2026-08-19 for rubric v2.12.0: scored under the returned criterion on the evidence recorded in its provenance. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. German warranty-only recovery 2026-10-04: current manufacturer-linked EN-Rev HiHero+ 1.3 names the unsuffixed family; DE terms integrated separately without changing technical criteria or AU/US evidence.
2026-08-18
GCL Australian NT10/72GDF 600-605 datasheet and AU warranty Rev. 2024-EN-AU-CEC-VER.1.0 Corrected 2026-08-18: Cell technology tier set to TOPCon tier. The exact-model datasheet already established N-type TOPCon and the scoring field was simply empty, so the record was scoring its own missing-data floor. Multi-market warranty-terms recovery 2026-08-29: structured AU, US or IN overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. US overlay recheck 2026-09-04: official United States surfaces still inaccessible or missing; held not_reviewed overlays restamped; existing non-US overlays and scores unchanged.
2026-08-18
LONGi Hi-MO X6 Explorer LR5-54HTH 440 W
Re-sourced 2026-08-18 and returned to Australian availability. The record previously scored the 435 W bin against a 415-435 M sheet at revision V17, and was marked unavailable in Australia because that bin's approval expired on 31 March 2025. LONGi has retired the Hi-MO 6 name: the family is published as Hi-MO X6, and the current Explorer sheet, version 20230926V19, spans 420-440 M. The CER export checked 2026-08-12 lists LR5-54HTH at 440, 445 and 450 W, and those bins split across two products: 440 W is the top of this Explorer sheet, while 445 and 450 W belong to the separate Hi-MO X6 Scientist LR5-54HTH 445-455 M sheet. The retained Australian scope is therefore the single 440 W bin, and the module is available again rather than withdrawn. Re-verification 2026-08-20: Independent energy yield recorded as brand-or-series under panel rubric v2.14.0, which applied to this criterion the same exact-model rule v2.13.0 applied to Verified reliability. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-18
Re-verified 2026-08-18 against LONGi's exact sheet, version 20241024V01, read page by page. Every scored value is unchanged and confirmed: 24.4% at the 660 M bin, bifaciality 70 +/- 5%, -0.260%/C Pmax, NOCT 45 +/- 2 C, 5,400 and 2,400 Pa static loading, IEC Class C, and 88.85% at year thirty. The Australian scope is corrected. The record published a 625-660 W range, but the CER export checked 2026-08-12 lists LR7-72HYD only from 645 to 660 W, so the retained range is the 645-660 W intersection. The scored bin and the score are unaffected, because 660 W sits inside both. Within the Hi-MO 9 series this model has since been superseded by LR8-66HYD, which reaches 24.8% and a higher 75 +/- 5% bifaciality. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model LR7-72HYD-660M, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Ammonia review 2026-10-04: current TÜV SÜD Certificate Explorer Z2 099333 0043 Rev. 33, dated 2026-08-24 and shown Valid, includes exact LR7-72HYD 625-670 W and IEC 62716:2013. Certification closes the ammonia disclosure gap without a numerical degradation or severity claim. Retained 660 W benchmark and Australian 645-660 W intersection are unchanged; wider certificate coverage does not refresh sale/approval. PID remains unestablished for this exact HYD: the accepted official PID-p image names LR7-72HVD, LR7-54HVD and LR8-66HYD, whose suffixes cannot be transferred. Whole-product, independent reliability and warranty-scope holds remain separate.
2026-08-18
Built 2026-08-18 from Tongwei's Australian-market datasheet, footer AUS-Ver.20241126, which carries a North Sydney address (Level 25, 100 Mount Street, 2060). The file is image-only: its text layer yields ~2 KB and no electrical table, so every figure here was read from a 170 dpi render, not parsed. The datasheet names the cell type only as "THC"; Tongwei's own newsroom expands THC as heterojunction, and the CEC list flags the family bifacial. TNC is Tongwei's separate TOPCon brand and must not be conflated. Prior research reported this family as absent from Tongwei's catalogue; that is wrong - the THC sheet sits behind the download page's category filter (typeid=47) and an unfiltered read of the page misses it. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model TWMHF-66HD735, under panel rubric v2.11.0 which added that band. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Australian warranty/service source recovered 5 October 2026: official AU A4 policy body dated 30 April 2026 with Appendix A5 catalogue label 27 August names exact TWMHF-66HD700–735. Six regional claim/service explanations integrated without changing global score, 735 W benchmark, approval dates or whole-product freshness. Upload/catalogue labels do not establish a contractual effective date.
2026-08-17
AIKO Neostar 3P54 Mono-Glass 500 W
Re-verified 2026-08-17 against AIKO's current datasheet, 202606 V2.1, retrieved and text-extracted rather than read from the product page. AIKO re-documented this family between May and June 2026: the sheet is now titled "Neostar 54", the 3P/3S generation designator is dropped, the filename carries a G4 prefix, and the printed SKU table reads AIKO-A485-MCE54Mw through AIKO-A510-MCE54Mw. AIKO's own product page still shows the older band, so page and datasheet disagree on the manufacturer's own site. AU range stays 475-500 W: the CER export lists AIKO-A475 through AIKO-A500-MCE54Mw to 4 June 2028, and A505/A510 are not Australian-approved. Scored model and score are unchanged, and the scored bin appears in both the current sheet and the regulator listing. Previous primary source: https://aikosolar.com/wp-content/uploads/2026/05/Neostar-3P54_193-AIKO-A-MCE54Mw_470-500W-1762%C3%971134%C3%9730_202604_V1.1_EN.pdf Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
AIKO Neostar 3P+54 Dual-Glass 495 W
Re-verified 2026-08-17 against AIKO's current datasheet, 202605 V5.1, retrieved and text-extracted rather than read from the product page. AIKO re-documented this family between May and June 2026: the sheet is now titled "Neostar 54", the 3P/3S generation designator is dropped, the filename carries a G4 prefix, and the printed SKU table reads AIKO-A480-MCE54Dw through AIKO-A505-MCE54Dw. AIKO's own product page still shows the older band, so page and datasheet disagree on the manufacturer's own site. DE range stays 465-495 W: the German product page and the German-market evidence still carry that band, and A500/A505 have no German certification recorded. Scored model and score are unchanged, and the scored bin appears in both the current sheet and the regulator listing. Previous primary source: https://aikosolar.com/wp-content/uploads/2025/04/Neostar-3PPlus54_193-AIKO-A-MCE54Dw_465-495W-1762x1134x30mm_202601_V3.1_DE.pdf Corrected 2026-08-18: Cell technology tier set to Full rear-contact tier, verified against the German band datasheet V3.1 which reads "Zellentyp N-Typ ABC". The field was empty, so the record scored its own missing-data floor and could not reach Premium Performance under the technology-keyed class system. First-market US overlay review 2026-09-01: official United States catalogues recorded; existing Australian and German overlays and scores unchanged. Exact-model hail recovery 2026-10-06: current 202605_V5.1__EN PDF page 2 names the scored AIKO-A495-MCE54Dw and gives 25 mm hail at 23 m/s. Standard hail band only; German 465–495 W range, 495 W benchmark and historical market checks retained. NOCT output is separately stated at 375 W with 20°C ambient test conditions; an explicit NOCT operating-cell-temperature value is not established.
2026-08-17
AIKO Neostar 3P+ 60-cell 550 W
Re-verified 2026-08-17 against AIKO's current datasheet, 202605 V5.1, retrieved and text-extracted rather than read from the product page. AIKO re-documented this family between May and June 2026: the sheet is now titled "Neostar 60", the 3P/3S generation designator is dropped, the filename carries a G4 prefix, and the printed SKU table reads AIKO-A540-MCE60Dw through AIKO-A565-MCE60Dw. AIKO's own product page still shows the older band, so page and datasheet disagree on the manufacturer's own site. AU range stays 530-550 W: the CER export lists AIKO-A530 through AIKO-A550-MCE60Dw to 4 January 2029, and A555 to A565 are not Australian-approved. Scored model and score are unchanged, and the scored bin appears in both the current sheet and the regulator listing. Previous primary source: https://aikosolar.com/wp-content/uploads/2026/03/Neostar-3PPlus60_193-AIKO-A-MCE60Dw_530-550W-1954x1134x30mm_202602_V4.1_ANZ.pdf Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
Huasun Everest G12R B108DSN 520 W
Built 2026-08-17 from Huasun's current exact datasheet 2.0_20251224_D, retrieved and text-extracted locally. The revision matters: the datasheet reached from Huasun's product page is a superseded V1.0_2024_10 file, and the current sheets are only served from the CMS listing. Between those revisions the 96-cell weight moved 21.8 to 21.6 kg, the 108-cell weight 27.4 to 27.1 kg, and the operating range narrowed from -40~+85 C to -40~+70 C. The sheet ladder spans 495-520 W; the retained Australian range is 500-520 W because the CER export checked 2026-08-12 lists HSN-210R-B108DSN only across 500-520 W, expiring 2027-10-22. Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model HSN-210R-B108DSN520, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model HSN-210R-B108DSN520, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
Huasun Everest G12R B132DS 620 W
Built 2026-08-17 from Huasun's current exact datasheet 1.0_20250814_U, retrieved and text-extracted locally. The revision matters: the datasheet reached from Huasun's product page is a superseded V1.0_2024_10 file, and the current sheets are only served from the CMS listing. Between those revisions the 96-cell weight moved 21.8 to 21.6 kg, the 108-cell weight 27.4 to 27.1 kg, and the operating range narrowed from -40~+85 C to -40~+70 C. The sheet ladder spans 600-630 W; the retained Australian range is 615-620 W because the CER export checked 2026-08-12 lists HSN-210R-B132DS only across 615-620 W, expiring 2027-10-22. Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model HSN-210R-B132DS620, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model HSN-210R-B132DS620, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
Huasun Everest G12R B96DS 460 W
Built 2026-08-17 from Huasun's current exact datasheet 2.0_20251224_D, retrieved and text-extracted locally. The revision matters: the datasheet reached from Huasun's product page is a superseded V1.0_2024_10 file, and the current sheets are only served from the CMS listing. Between those revisions the 96-cell weight moved 21.8 to 21.6 kg, the 108-cell weight 27.4 to 27.1 kg, and the operating range narrowed from -40~+85 C to -40~+70 C. The sheet ladder spans 440-470 W; the retained Australian range is 440-460 W because the CER export checked 2026-08-12 lists HSN-210R-B96DS only across 440-460 W, expiring 2027-10-22. Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model HSN-210R-B96DS460, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model HSN-210R-B96DS460, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
Huasun Everest G12R B96DSN 460 W
Built 2026-08-17 from Huasun's current exact datasheet 2.0_20251224_D, retrieved and text-extracted locally. The revision matters: the datasheet reached from Huasun's product page is a superseded V1.0_2024_10 file, and the current sheets are only served from the CMS listing. Between those revisions the 96-cell weight moved 21.8 to 21.6 kg, the 108-cell weight 27.4 to 27.1 kg, and the operating range narrowed from -40~+85 C to -40~+70 C. The sheet ladder spans 435-460 W; the retained Australian range is 440-460 W because the CER export checked 2026-08-12 lists HSN-210R-B96DSN only across 440-460 W, expiring 2027-10-22. Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model HSN-210R-B96DSN460, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model HSN-210R-B96DSN460, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
Huasun Everest G12R S108DSB 520 W
Built 2026-08-17 from Huasun's current exact datasheet 2.0_20251224_D, retrieved and text-extracted locally. The revision matters: the datasheet reached from Huasun's product page is a superseded V1.0_2024_10 file, and the current sheets are only served from the CMS listing. Between those revisions the 96-cell weight moved 21.8 to 21.6 kg, the 108-cell weight 27.4 to 27.1 kg, and the operating range narrowed from -40~+85 C to -40~+70 C. The sheet ladder spans 505-530 W; the retained Australian range is 505-520 W because the CER export checked 2026-08-12 lists HSN-210R-S108DSB only across 500-520 W, expiring 2027-10-22. Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model HSN-210R-S108DSB520, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model HSN-210R-S108DSB520, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-17
Huasun Everest G12R S96DSB 460 W
Built 2026-08-17 from Huasun's current exact datasheet 2.0_20251224_D, retrieved and text-extracted locally. The revision matters: the datasheet reached from Huasun's product page is a superseded V1.0_2024_10 file, and the current sheets are only served from the CMS listing. Between those revisions the 96-cell weight moved 21.8 to 21.6 kg, the 108-cell weight 27.4 to 27.1 kg, and the operating range narrowed from -40~+85 C to -40~+70 C. The sheet ladder spans 445-470 W; the retained Australian range is 445-460 W because the CER export checked 2026-08-12 lists HSN-210R-S96DSB only across 440-460 W, expiring 2027-10-22. Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model HSN-210R-S96DSB460, matched on exact model identity rather than brand or series. The exact-model enhanced listing includes salt-mist certification without a published severity; the certification-without-severity band is retained. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model HSN-210R-S96DSB460, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Reader explanation corrected 6 October 2026: the previously accepted 18 August certifications for PID, ammonia and salt mist are retained. Salt severity, numerical PID loss and extended damp-heat hours remain unestablished; current datasheet access is blocked. This wording correction is not a new certification verification.
2026-08-17
RECOM Black Tiger 7RDBRCG 510 W
Built 2026-08-17 from RECOM's exact datasheet 059-2026-01-v2.0, retrieved and read directly. This is a global frontier-register record: it carries no market overlay and makes no availability, certification, warranty or installer-compatibility claim for any territory. RECOM publishes no market list for the Black Tiger series and the module holds no Australian CER approval, so no market has been reviewed rather than a market having been reviewed and found unavailable. First-market overlay review 2026-08-30: AU, US and DE overlays recorded from official regional surfaces; scores and identities unchanged. DE RECOM Black Tiger catalogue recheck 2026-09-12: live German Black Tiger surface now names the 495-510 W 7RDBRCG card after the earlier Cloudflare HOLD; Australian and United States overlays and scores unchanged Current German exact510W7RDBRCG catalogue and linked RECOM module warranty Rev.02-25_V.01 reviewed 2026-10-05: six service terms integrated; transferability misreading corrected from 75 to 100 under unchanged rubric because 15-day ownership evidence runs after a RECOM request, not initial registration. Series-level/direct sales-contract scope retained; regional review dates/status and AU/US holds unchanged.
2026-08-16
Powerwall 3P German datasheet and warranty effective 19 March 2026, checked 2026-08-16. First-market US overlay review 2026-09-01: official United States catalogues recorded; existing Australian and German overlays and scores unchanged. Correction 2026-10-08: operating temperature corrected from the wide, heat-optimised band to the standard band, and warranty throughput corrected to unlimited cycles for standard solar use, from the German warranty and datasheet.
2026-08-10
Jinko Solar Tiger Neo III 51-cell Dual-Glass 515 W
Jinko Tiger Neo III 51QL6-DV R4.5, AU/NZ warranty REV.AU20251210 and CER export checked 2026-08-10 Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model JKM515N-51QL6-DV, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model JKM515N-51QL6-DV, under panel rubric v2.11.0 which added that band. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. DE Jinko Tiger Neo catalogue recheck 2026-09-04: live German Tiger Neo 2.0 and 3.0 surfaces recorded after the earlier jinkosolar.eu HTTP 403; Australian and United States overlays and scores unchanged.
2026-08-07
Jinko Solar Tiger Neo III 48-cell Dual-Glass 480 W
Jinko Tiger Neo III 48QL6-DV R4.5, AU/NZ warranty REV.AU20251210 and CER export checked 2026-08-07 Re-verification 2026-08-18: ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model JKM480N-48QL6-DV, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model JKM480N-48QL6-DV, under panel rubric v2.11.0 which added that band. Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. First-market US overlay review 2026-08-31: official United States catalogues recorded; Australian and German overlays and scores unchanged.
2026-08-07
REC Alpha Pure-RX 44-cell 475 W
REC Alpha Pure-RX IEC AU CEC 6.2026 V6, Alpha warranty Rev 8 and CER export checked 2026-08-07. First-market DE overlay review 2026-08-31: official German catalogues recorded; Australian and United States overlays and scores unchanged. Correction 2026-10-08: power tolerance corrected from 2% to 1%, derived from the datasheet's 0 to +5 W tolerance at 470 W.
2026-08-07
Trina Solar Vertex S+ G3 NEG10R.28Z 515 W
Trinasolar TSM_AUS_EN_2026_PA5, global warranty PS-M-0135 PAC1 and CER export checked 2026-08-07 LeTID re-verified 2026-08-19 for rubric v2.12.0: scored under the returned criterion on the evidence recorded in its provenance. Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. LeTID reviewed absence linked to the exact current datasheet on 2026-08-23. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Environmental evidence integrated 4 October 2026: three current TÜV SÜD certificates dated 27 August 2026 explicitly cover TSM-xxxNEG10R.28Z, 156 one-third-cut cells, double-glass monofacial construction and 480–515 W in 5 W steps. The prior half-cell/78-cell-format description is corrected; the exact model code and 515 W benchmark are preserved. PID-shunting certification has no published numerical loss. Salt-mist test method 6 under IEC 61701:2020 supports severity 6; ammonia certification uses IEC 62716:2013 without a quantitative endpoint. Printed expiry is 8 March 2031 unless cancelled earlier; live surveillance status was not checked. The AU 495–515 W range and 515 W STC versus 393 W NOCT remain distinct. The 510 W marketing sweet-spot does not replace the assessed bin.
2026-08-07
Exact IQBATTERY-5P-1P-NA US datasheet, activation-date warranty, owner guidance and buyer-consequence boundaries reviewed 2026-08-07; regional identity split 2026-08-08. First-market DE overlay review 2026-09-01: official German catalogues recorded; existing Australian and United States overlays and scores unchanged. Correction 2026-10-08: safety certification corrected from UL9540A plus IEC62619 to UL9540 / IEC62619 because the US datasheet lists no IEC 62619, and the warranty degradation guarantee corrected to the stepped form in the governing US warranty.
2026-08-07
CQ7 current AU regulator identity, expired CQ7-50 boundary and local warranty conflict re-audited 2026-08-07. First-market US and DE overlay review 2026-08-30: official regional catalogues recorded; Australian overlays and scores unchanged. Exact standard Australian CQ7-L2 DC power boundary reconciled 5 October 2026 from accepted current manual V1.0.0, printed April 2026, PDF pages 24-26. One CQ7-M plus one CQ7-S, 115.2 V nominal, 13.92 kWh benchmark retained. Maximum continuous charge/discharge 80 A, standard CC-CV charging 50 A, and 120 A peak discharge for 60 seconds are distinct rows. Nominal DC reference powers are 9.216 kW and 13.824 kW; neither is constant power over SOC nor AC household output. Former scored 5.76 kW and 65 A peak prose are corrected without transferring CQ7-50, heated or overseas variants. AC output remains outside this DC battery record. No market, warranty or whole-product verification refresh. CQ7 firmware/security disclosure reviewed 5 October 2026: accepted reachable Australian FoxESS policy V1.0 (July 2026) explicitly covers battery ESS and device firmware; disclosure band 40 to 80. Exact CQ7 support duration and firmware protections remain unestablished. Prior failed global locator retained separately; no whole-product verification refresh.
2026-08-06
Canadian Solar TOPHiKu6 48TD 470 W
Canadian Solar TOPHiKu6 All-Black CS6.2-48TD V1.5 AU and TopHiKu AU warranty V2.0 reviewed 2026-08-06 Re-verification 2026-08-18: ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model CS6.2-48TD-470, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model CS6.2-48TD-470, under panel rubric v2.11.0 which added that band. LeTID re-verified 2026-08-19 for rubric v2.12.0: scored under the returned criterion on the evidence recorded in its provenance. Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. EPD disclosure integration reviewed 2026-10-04: MR-EPDITALY0105 names the CS6.2-48TD family and uses a 470 W reference; the scored Australian All-Black 470 W benchmark is unchanged. Published family EPD disclosure is established, while All-Black-specific construction/BOM and applicability to Australian supplied units remain unresolved. The EPD uses 2024 data from four Chinese factories and an Italian 30-year cradle-to-grave model, reporting 0.0175 kg CO2eq per kWh generated. The AU sheet also permits Thai production, which this EPD does not establish. This is not a certified manufacturing footprint in kg CO2/kWp or measured Australian energy yield; no low-carbon manufacturing threshold is claimed.
2026-08-06
Trina Solar Vertex S+ NEG18R.25 515 W
Exact family documentation reviewed 2026-08-06 Corrected 2026-08-19: the LeTID resistance claim is withdrawn. It was attributed to this product's datasheet, and neither the archived copy nor the live file contains any LeTID, LID or light-induced string. No score changes: the field is unscored. LeTID re-verified 2026-08-19 for rubric v2.12.0: scored under the returned criterion on the evidence recorded in its provenance. Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. LeTID reviewed absence linked to the exact current datasheet on 2026-08-23. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Environmental evidence integrated 4 October 2026: current official catalogue certificates dated 27 August 2026 explicitly cover TSM-xxxNEG18R.25, double-glass monofacial 108-cell, 470–525 W bins, including this 515 W benchmark. PID-shunting certification has published stress conditions but no numerical loss; salt-mist test method 6 under IEC 61701:2020 supports severity 6; ammonia certification uses IEC 62716:2013 without published concentration, duration or loss. Printed expiry is 8 March 2031 unless cancelled earlier, not independently checked surveillance status. No .28 PVEL or generic offshore severity-8 transfer. The 515 W STC and 394 W NOCT values remain distinct.
2026-08-03
Solahart Silhouette BRB3 48-cell 455 W
Solahart Silhouette SOLAHART455BRB3 datasheet June 2025 V3; current BRB3 governing warranty and exact CEC entries checked 2026-08-03 Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model SOLAHART455BRB3, under panel rubric v2.11.0 which added that band. LeTID re-verified 2026-08-19 for rubric v2.12.0: scored under the returned criterion on the evidence recorded in its provenance. Corrected 2026-08-19: the recorded primary_source resolved to a digital-asset-manager viewer page serving text/html, not a document, and no archived copy existed for this record at all. Replaced with the direct PDF, application/pdf, 210,828 bytes, verified %PDF and %%EOF and confirmed to contain the scored model SOLAHART455BRB3, 22.8% efficiency, the 6 x 16 n-type monocrystalline half-cell construction and the zero-busbar design this record already published. The figures were right; the citation pointed at a viewer shell. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-08-02
Jinko Solar Tiger Neo 54HL4R-BDV 450 W
Jinko JKM430-450N-54HL4R-BDV Australian CEC sheet and Australian warranty reviewed 2026-08-02 Re-verification 2026-08-18: PID and ammonia resistance recorded from the Clean Energy Council enhanced listing for exact model JKM450N-54HL4R-BDV, matched on exact model identity rather than brand or series. Salt mist is also enhanced-listed for this model but the rubric bands salt mist by severity and the regulator publishes none, so it remains unset. Re-verification 2026-08-18: salt mist recorded as certified without published severity from the Clean Energy Council enhanced listing for exact model JKM450N-54HL4R-BDV, under panel rubric v2.11.0 which added that band. Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. Re-verification 2026-08-20: Independent energy yield recorded as brand-or-series under panel rubric v2.14.0, which applied to this criterion the same exact-model rule v2.13.0 applied to Verified reliability. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. DE Jinko Tiger Neo catalogue recheck 2026-09-04: live German Tiger Neo 2.0 and 3.0 surfaces recorded after the earlier jinkosolar.eu HTTP 403; Australian and United States overlays and scores unchanged. Partial environmental review 2026-10-04: exact AU scored JKM450N-54HL4R-BDV independently covered by DEKRA PID 31-169709 REV.3 (IEC TS 62804-1:2025, issued 21 August 2026, latest expiry 31 December 2030) and salt-mist 31-90006-003 REV.21 (IEC 61701:2020, issued 25 August 2026, latest expiry 4 July 2027). Both annexes specify 360-460 W/5 W,108 half-cut cells,1500 V. Certification establishes neither measured PID loss nor salt severity; no protocol-equivalent numerical performance or new market availability is inferred. Existing certification values and scores unchanged. This partial review does not refresh other claims or market dates.
2026-08-02
Fronius Symo GEN24 Plus SC 12 kW
Fronius Symo GEN24 SC Australian datasheet EN_AUS V07 September 2025, current operating instructions, warranty and Australian approved-inverter list checked 2026-08-02; AU inverter outage-reality evidence checked 2026-08-06. First-market US and DE overlay review 2026-08-30: official regional catalogues recorded; Australian overlays and scores unchanged. Correction 2026-10-08: the shutdown and arc-safety row corrected from integrated AFCI enabled by default to AFCI that is optional and software-activatable, because the Arc Guard ships disabled.
2026-08-02
GoodWe SDT G3 Australian datasheet, 5-20 kW Bounded 6 October 2026 reader reconciliation: accepted original 5-20 kW AU V2.1 sheet retains exact GW20K-SDT-AU30 / 20000 W benchmark. Current AU PDP, 19 March 2026 enlarged-range AU V2.1 sheet and manual V2.4 dated 25 March 2026 establish documented lower-model labels and unresolved alias/revision, printed power-unit, cooling and SPD headline/table boundaries. No model alias rewrite, 25/29.9 kW expansion, source supersession, criterion/score, approval, market/warranty or full-record verification-date change. Bounded 6 October 2026 warranty evidence correction: current AU/NZ Rev 5.9 dated 17 September 2026 replaces stale criterion prose and old SBP-G2 locator that claimed an unnamed spare-parts extension. Five-year numeric input and global Parts only band remain unchanged; conditional AU labour/freight is explained, and global assurance applicability remains held. Supplied-unit/older-agreement rights, markets, identity, technical criteria and full-record dates are preserved.
2026-08-02
Huawei installed-base support and iStore Australian transition reviewed 2026-08-02 Correction 2026-10-08: night standby consumption corrected from 1.5 W to 2.5 W, the maximum in the exact datasheet.
2026-08-02
Sungrow SH5T / SH10T Three-Phase 9.999 kW
Sungrow SH5/10T datasheet Version 3, SH5-25T manual Version 17, Australian warranty Version 4.2 and current approved-inverter list checked 2026-08-02; AU inverter outage-reality evidence checked 2026-08-06. India existing-catalogue inverter review 2026-09-02: IN overlays recorded from manufacturer Indian catalogues; scores unchanged. Bounded 6 October 2026 backup-timing reader integration: maker-linked manual SH5_6_8_10_12_15_20_25T-UEN-Ver18-202512, exact SH10T table PDF132-133, agrees with Version 3 below-10-ms switch specification; Australian 0 ms headline qualified. Other fields and full-record/market verification dates unchanged. Correction 2026-10-08: maximum input current per MPPT corrected from 16 A to 32 A (two strings on the first MPPT), from four exact Sungrow documents.
2026-08-01
AIKO Australia Neostar 2P54 exact product page, 450-485 W datasheet V4.1 and warranty v1.6.3, rechecked 2026-08-01 Re-verification 2026-08-19: Verified reliability recorded as "Brand or series independently tested; exact model not covered" under panel rubric v2.13.0, which added a band for brand or series evidence where the exact model is not covered by the third-party record. Re-verification 2026-08-20: Independent energy yield recorded as brand-or-series under panel rubric v2.14.0, which applied to this criterion the same exact-model rule v2.13.0 applied to Verified reliability. Australian warranty-terms recovery 2026-08-29: structured AU overlay terms recovered or held from the exact governing instrument. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged.
2026-07-30
Enphase IQ8HC 208/240 V 0.384 kW
North America IQ8HC datasheet DSH-00047-10.0-EN-2026-07-30. Exact US performance revision integrated 2026-10-05; dated market, warranty and regulator determinations are retained without a broad re-verification.
2026-06-23
Pylontech US 5000 specification EN-SD-250424, published 2026-06-23; Australian US Series warranty AU22WUSS100302. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Cell-balancing reader explanation integrated 2026-10-05 from manufacturer-hosted US5000-series manual V1.0, 5PMPA08-00219, PDF3/8/16/32. Each-cell voltage balancing is disclosed; energy-transfer method remains unestablished. Current catalogue revision equivalence and installed firmware/BOM are not assumed; no score or full market re-verification.
2025-10-14
Whispr specifications V6.0 dated 2025-10-14, installation manual V1.1 dated 2025-09-08, and governing warranty V4.0 dated 2025-10-02. First-market US and DE overlay review 2026-09-01: official regional catalogues recorded; Australian overlays and scores unchanged. Bounded 6 October 2026 retention wording reconciliation: AU/NZ V4.0 distinguishes explicitly guaranteed minimum throughput from expected70% EOL. Prior unqualified endpoint-guarantee prose corrected; numeric/global bands remain under separate interpretation hold with scores unchanged. No linear retention, specified ten-year minimum, independent cycle test, regional expansion or full-record date change inferred.
2024-06-01
Yingli PANDA 3.0 Pro 1 US datasheet V07 and glass-glass warranty V04 dated 2024-06-01 Corrected 2026-08-18: Cell technology tier set to TOPCon tier. The exact-model datasheet already established N-type TOPCon and the scoring field was simply empty, so the record was scoring its own missing-data floor. Multi-market warranty-terms recovery 2026-08-29: structured AU, US or IN overlay terms recovered or held from the exact governing instrument. First-market DE overlay review 2026-09-01: official German catalogues recorded; existing Australian and United States overlays and scores unchanged.
Routine evidence refreshes, new sources and score movements that follow the published methodology are not corrections and appear in each record's revision line instead. This register lists the cases where a published record said something its evidence did not support.